| 翻訳と辞書 |
| Remediation of contaminated sites with cement ： ウィキペディア英語版 |
Remediation of contaminated sites with cement
Remediation of contaminated sites with cement, also called solidification/stabilization with cement (S/S with cement) is a common method for the safe environmental remediation of contaminated land with cement. The cement solidifies the contaminated soil and prevents pollutants from moving, such as rain causing leaching of pollutants into the groundwater or being carried into streams by rain or snowmelt. Developed in the 1950s, the technology is widely used today to treat industrial hazardous waste and contaminated material at brownfield sites i.e. abandoned or underutilized properties that are not being redeveloped because of fears that they may be contaminated with hazardous waste.〔 Wilk, C. M. (n.d.). Applying solidification/stabilization for sustainable redevelopment of contaminated property. Retrieved from http://www.pollutionengineering.com/PE/Home/Files/PDFs/PCA_S-S_Whitepaper.pdf〕 S/S provides an economically viable means of treating contaminated sites. This technology treats and contains contaminated soil on site thereby reducing the need for landfills.
==Process==
The Solidification/Stabilization method utilizes chemically reactive formulations that form stable solids that are non-hazardous or less-hazardous than the original materials.〔 〕 Solidification refers to the physical changes in the contaminated material when a certain binding agent is added. These changes include an increase in compressive strength, a decrease in permeability, and condensing of hazardous materials.〔 Stabilization refers to the chemical changes between the stabilizing agent (binding agent) and the hazardous constituent. These changes should include a less soluble, less toxic constituent with hindered mobility.〔 4.20 solidification/stabilization. (n.d.). Retrieved from http://www.frtr.gov/matrix2/section4/4-21.html〕 Common bonding agents include, but are not limited to, portland cement, lime, limestone, fly ash, slag, clay, and gypsum. Because of the vast types of hazardous materials, each agent should be tested on the site before a full-scale project is put under way. Most binding agents used are a blend of various single binding agents, depending on the hazardous material it will be used on. Portland cement has been used to treat more contaminated material than any other S/S binding agent because of its ability to bind free liquids, reduce permeability, encapsulate hazardous materials, and reduce the toxicity of certain contaminants. Lime can be used to adjust the pH of the substance of drive off water by using high heats of hydration. Limestone can also be used to adjust pH levels. Slag is often used for economical purposes because of its low cost.〔 Wilk, C. M. (n.d.). Applying solidification/stabilization for sustainable redevelopment of contaminated property. Retrieved from http://www.pollutionengineering.com/PE/Home/Files/PDFs/PCA_S-S_Whitepaper.pdf〕
抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』
■ウィキペディアで「Remediation of contaminated sites with cement」の詳細全文を読む
スポンサード リンク
| 翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|